Products
›
Hall Effect Sensors

Hall Effect Sensors

Table of Contents

Single Hall Effect SensorsDual Hall Effect Sensors

Single Hall Effect Sensors

Extend the lifespan and reduce downtime by choosing our tailor-made solutions for various applications, including speedometer inputs, engine timing, transmission inputs and outputs, cam and crankshaft outputs, traction and chassis control, wheel speed ABS, and industrial process control. We are excited to meet your needs with unparalleled speed, reliability, performance, and customer service.

Our high-quality Hall-effect sensors are designed to thrive under the harsh conditions typical in hydraulic motors used in mobile off-highway markets. We are committed to delivering the finest sensor solutions for high-performance machinery.

Our Single and Dual Hall Effect Sensors are perfect for a broad array of industries. With our specialized product development, these sensors serve as cost-effective alternatives to inductive proximity sensors, Variable Reluctance sensors, and other competing technologies.

Features

  • Sensing ferrous metal targets.
  • Digital Output, pull up resistor can be built into the sensor according to customer’s application.
  • Good signal-to-noise ratio.
  • EMI Resistant.
  • Reverse polarity and transient protection.
  • Excellent low speed performance, Output amplitude not dependent on RPM.
  • Available in standard and metric thread and smooth housing sizes 303 Stainless Steel and other housing materials available.

Applications

  • Camshaft/Crankshaft speed and position
  • Transmission Speed
  • Anti-skid/traction control
  • Chain link conveyor speed/distance
  • Counters, Tachometers

Typical Specification

Supply Voltage Range

4.5 Vdc to 26.5 Vdc

Supply Current

20 mA

Output Type

Digital Sinking (Open Collector)

Frequency Range

0 Hz to 25 kHz (inclusive)

Operating Tempurature

-40°C to 125°C

‍

Dual Hall Effect Sensors

Sentech's Dual Hall Effect Sensors offer reliable sensing solutions under challenging environmental conditions, from initial concept and design to retrofitting on existing hydraulic equipment or machinery to improve control and steering.

These sensors are capable of simultaneously detecting speed and rotation. They produce a frequency signal on channel A and a 90° phase shifted frequency signal on channel B, enabling the Quadrature signal to ascertain rotation direction.

With their compact contact surface and diameters as small as 12mm, these sensors are designed to function under extremely high pressures. Available in various configurations, and are tailored to suit your specific application needs.

Features

  • Two digital output signals 90° out of phase to each other
  • Detecting speed down to zero
  • Direction, forward and reverse, of ferrous targets
  • Constant amplitude square wave output
  • Wide speed range
  • Customize to the needs of your specific mechanical environment
  • Available in standard and metric thread and smooth housing sizes 303 Stainless Steel and other housing materials available.

Applications

  • Hydraulics
  • Turbines
  • Compressors
  • Transmissions

Typical Specification

Supply Voltage Range

4.5 Vdc to 18 Vdc

Supply Current

18 mA max

Output Type

Square Wave

Frequency Range

1 Hz to 15 kHz (inclusive)

Operating Tempurature

-40°C to 125°C

‍

‍

Interested in learning more?
Contact Us →
Sentech designs and manufactures with ISO 9001:2015, AS9100 Rev D certified quality management system. ANAB accredited.
‍
Most Sentech products meet the following standards and/or certifications:
UL/CSA, ATEX, IECEX, TIIS (Japan), KOSHA / KCA (South Korea), Class 1 / Division 2 for harsh environments with flammable gasses or combustible dusts, IP54/IP65/IP66/IP67, RoHS - Reduction of Hazardous Substances, REACH - Restricted Chemicals List
Learn more about our standards and certifications →

All Sentech Inc. products are warranted against defective materials and workmanship. This warranty applies for a period of one year from the date of delivery to the original purchaser. Any product that is found within the one year period not to meet these standards will be replaced or repaired at the discretion of Sentech Inc. No other warranty is expressed or implied. Although Sentech Inc. manufactures its products to exacting specification standards, we assume no responsibility for their misuse. Sentech Inc. accepts no liability for damages, incidental or punitive, in applications using our products. Please note: It is solely the user’s responsibility to properly install and maintain transducers. Sentech Inc. manufactures its products to meet stringent specifications and cannot assume responsibility for those consequences arising from their misuse or unauthorized modification. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Markets
All MarketsAerospace & Defense ApplicationsIndustrial Applications
Company
About UsNewsCareersStandards & CertificationsTerms & ConditionsPrivacy PolicyContact Us
Products
Markets
About Us
Careers
Resources
Contact Us →